Internal Coating
Coating plants for spraying in the field intended to apply a protective coating on the pipe inner surface acting.
|
Description |
459 (459.220.1 ) |
459 (459.220.2 ) |
459S (459.220.3 ) |
459S (459.220.4 ) |
||||||
|
General description |
Standard trailer |
Standard trailer with oversize tanks for material |
Install on the sled with 200 l tanks |
Extra-long trailer with oversize tanks for the material and the alternator. |
||||||
1 |
Steel chassis/frame trailer with aluminium body panels |
Body dimensions 3.0 x 2.1 x 2.1 m (ДШВ) + tugboat The total weight of 4500 kg without material |
Body dimensions 3.0 x 2.1 x 2.1 m (ДШВ) + tugboat The total weight of 6000 kg without material
|
Runner dimensions 3.5 x 2.1 x 2.0 m (ДШВ) The total weight of 4000 kg without material |
Body dimensions 5.0 x 2.1 x 2.3 m (ДШВ) + tugboat The total weight of 8000 kg The composition - the alternator |
||||||
2 |
Tanks for the material; stainless steel, with isolation and caps. A (Activator). (B) (the main component). The tank may have an impact on the overall size. Pressurize the protective gas for moisture-sensitive materials; stitch holes for measurements |
Total capacity: 300 l
100 l 200 l |
Total capacity: 600 l
200 l 400 l |
Total capacity: 600 l
200 l 2x200 l (400 l) |
Total capacity: 750 l
250 l 2x250 l (500 l) |
||||||
3 |
Heating tank. A.) oil circulation or (b.) Self-adhesive heating pads, depending on customer's guidelines. |
1.5 KW for tank A, 3 kw for tank B |
1.5 KW for tank A, 3 kw for tank B |
2 Kw for the tank A, 2 kw for each tank (B |
2 Kw for the tank A, 2 kw for each tank (B |
||||||
4 |
Agitator Drive the tank cover to the main component and the blade agitator assembly |
Standard: geared motor power 0.5 KW |
Standard: geared motor power 0.5 KW |
Standard for tanks (B. |
Standard: geared motor power 0.5 KW |
||||||
5 |
The supply pump 105/09/T06, pressure ratio 9:1 |
1 x A 2 x B |
1 x A 2 x B |
1 x A 2 x B |
1 x A 2 x B |
||||||
6 |
The inlet filter for the tank and the inlet filter/screen low pressure |
1" Supply Hose |
1" Supply Hose |
1" Supply Hose |
1" Charge Hose |
||||||
7 |
The metering pump to supply a multicomponent mixture with the installation in the selected location. (Standard dimensions and parameters) Pressure ratio from 1:1 to 9:1 with a specific step growth |
||||||||||
|
Mixing Ratio |
The metering pump |
Pressure Ratio |
Pump Type |
The volume over the cycle (l) |
Performance 20cycles (l/min) |
Maximum 428 bar (6000 psi) |
||||
459 |
2.5 :1 |
450 |
56:1 |
98-95-98 |
0.65 |
13.06 |
From 1.25 l/min to 12.0 l/min depending on the type of material |
||||
|
2:1 |
450 |
52:1 |
98-98-98 |
0.69 |
13.93 |
|||||
|
1:1 |
450 |
79:1 |
98-CBR '98 |
0.49 |
9.29 |
|||||
459 HP |
2.5 :1 high-pressure |
450 |
:1 |
94-93-94 |
0.43 |
8.60 |
From 1.0 l/min to 8.0 l/min depending on the type of material |
||||
|
|||||||||||
|
|
459 |
|||||||||
8 |
Output pressure gauge high-pressure and high-pressure relief valve |
High-pressure relief valve 7500 lb. /sq. in. |
|||||||||
9 |
The device heating high-pressure seawater fluid in the kit with the thermostat |
Optional, optional: 2 x 240 in 3 kw each, with a limit 60C |
|||||||||
10 |
High-pressure filter assembly in supplied with drain and oxidizing gases |
3 |
|||||||||
11 |
The Panel monitoring the flow rate in the kit with septic tanks and the sensors |
1 On the system of the 3 lines
|
|||||||||
12 |
Rotary connection with high-pressure seals and segmented structure to supply materials from pumping system in an integral hose on a rotating drum. |
6 Port ½" , max. air bag. operating pressure 428 bar at 60 C (2) port B to flow in the hose with a high flow) |
|||||||||
13 |
Wellhead equipment link back to heater and recirculation 2 components |
Unified part |
|||||||||
14 |
Drum for hose The electric winch, expansion valve and electronic conversion speed and torque. Traction and control cylinder |
Capacity 270 m x 67mm The motor 4 kw Speed range from 1 to 6 m/min. (3' - 20 ')
The Force rewind 5 000 kg |
|||||||||
15 |
Heated an integral hose (hot water), diameter and length: |
Standard: 67 mm / 230 m A 1/2-inch hose. Hose B 5/8" The air hose 5/8" |
|||||||||
16 |
Tank for hot water and heating element heater |
6 Kw 240, and the water pump high pressure |
|||||||||
17 |
The Mechanism styling hose |
A fully automated system, the mechanism styling with two helical screws |
|||||||||
18 |
Curved tray assembly for the establishment of safe bend radius hose when descending into the ditch |
The Radius 900 mm |
|||||||||
19 |
The connecting hoses A, B, and air wrapping for air recirculation system in heated water |
Unified part |
|||||||||
20 |
The mixer with a Y-shaped connector |
Disposable mixers |
|||||||||
21
|
Spraying head PC100 assembly with carriage for pipes with a diameter: |
75 - 300 mm (3" - 12 ") |
|||||||||
22 |
Spraying head PC150 assembly with carriage for pipes with a diameter: |
250 - 450 mm (10" - 18 ") |
|||||||||
23 |
Spraying head PC250 assembly with carriage for pipes with a diameter: |
350 mm - 1000 mm (14" - 39 ") |
|||||||||
24 |
Electrical control panel supplied with splice, fuses and the control circuit |
Unit size 800x600x300 |
|||||||||
25 |
Control panel computer The company has developed and adopted in a computer system in combination with keyboard and printer, equipped with its own memory block, voice recognition system errors, and support for remote access. Different access levels and categories of users. |
Unit size 600x600x300 with colour display 375 mm (15 " ). Includes a modem GSM/GPRS roaming. |
|||||||||
26 |
The compressed air supply with control panel |
Pressure 8 bar, 8 m3/min (115 lb. /sq. inch, 250 cu. ft in mines.) |
|||||||||
27 |
Mounting and support equipment, marking, leadership and first aid kit |
||||||||||
28 |
Optional: a built-in diesel-generator: 1500 rpm., 4 cylinder diesel engine. Fuel tank capacity/flow: |
30 KVA, 380/440 V or 220/240 V AC. 110/120 V, 50 Hz or 60 Hz
80 L/10 hours at 75% load |
|||||||||
29 |
Other additional and optional equipment |
|
|||||||||
|
The compressors and generators of all sizes; tanks increased; levelling system using the hydraulic cylinders; automatic stacking hose; rinse pump; service winch; a set of tools and spare parts kits; resistance makes tantalum head larger in size with carriages Inertia rollers to work with large diameter tubes |
|
|||||||||
|
Technical parameters may be changed without prior notice |
|